Shenzhen Lianchengfa Technology Co., Ltd.

If there is a problem of water entering the LED display during use or storage, then use a fan or other tools to completely dry the LED display screen with water at the fastest speed. After that, the screen body after being completely dried is energized and aged.

When the LED display is aging, first adjust the brightness (full white) to 10%, and power on for 8-12 hours. Then adjust the brightness (full white) to 30%, power on and age for 12 hours. After that, adjust the brightness (full white) to 60%, and power on and age for 12-24 hours. After that, adjust the brightness (full white) to 80%, and power on and age for 12-24 hours. Finally, adjust the brightness (full white) to 100%, and power on and age for 8-12 hours.

The LED display screen will basically return to normal through the above operations, but there are several precautions in the processing process: When it is found that the box body or the LED display screen body enters water, emergency measures should be taken. Deal with it, don't procrastinate. Organize personnel to dry the LED display screen that has entered the water. Do not put the LED display screen that has entered the water into the air box, it is easy to suffocate the LED lights. When the box is filled with water, the air box may be flooded. All the air boxes should be exposed to the sun to prevent the water from volatilizing into the LED display screen after the box is packed. Failure to deal with all water-infused LED displays in time may affect the stability of the screen to a greater or lesser extent. During the emergency treatment process, the screen may continue to die after the screen is powered on, which requires manufacturers to pay attention to it at any time. observe.

The last thing to remind is that if the LED display is in use, the screen body enters the water, then the first step is to disconnect the power supply immediately, otherwise it is easy to directly burn the display due to conductive reasons.